| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Seat | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003GTL000X |
| Title: SEAT: REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type RH Side): REMOVAL (2008 Sequoia) | ||
REMOVAL
1. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY
2. REMOVE LUGGAGE COMPARTMENT TRIM BOX
3. REMOVE ROPE HOOK ASSEMBLY
4. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY
5. REMOVE DECK BOARD REINFORCEMENT SUB-ASSEMBLY
6. REMOVE DECK BOARD BRACKET
7. REMOVE SEAT TRACK BRACKET FRONT COVER OUTER
|
(a) Disengage the 2 claws and 2 guides in the order shown in the illustration, and then remove the seat track bracket front cover outer. |
8. REMOVE SEAT TRACK BRACKET FRONT COVER INNER
|
(a) Disengage the claw and clip and 2 guides in the order shown in the illustration, and then remove the seat track bracket front cover inner. |
9. REMOVE REAR NO. 2 SEAT ASSEMBLY RH
|
(a) Remove the 2 bolts. |
|
(b) Remove the 2 bolts. |
(c) Remove the rear No. 2 seat assembly RH.
NOTICE:
Be careful not to damage the vehicle body.
|
|